Trin a storio

‍

Delifriad

Fel arfer, gellir trefnu cludiant a chyflwyno blociau WikiHouse yn uniongyrchol gyda'ch gwneuthurwr i wneud yn siŵr eu bod yn cyrraedd y safle ar gam priodol yr adeilad. Efallai y byddwch yn dewis trefnu darpariaeth mewn camau yn seiliedig ar gapasiti trafnidiaeth a gofod storio safle. Yr amseru gorau ar gyfer y cyflwyno cychwynnol yw ar ôl i'r holl waith sylfaen, gan gynnwys rheiliau chassis, gael eu gosod yn iawn.  

Argymhellir lorïau wedi'u gorchuddio â chragen feddal i ddiogelu blociau rhag y tywydd a lleithder gormodol wrth gludo, tra'n gwneud i bosibl lwytho a dadlwytho o'r ochr a'r to. Gall lori nodweddiadol gario rhwng gwerth 30-40m2 o flociau o flociau.

For small scale builds, such as garden studios and household extensions, WikiHouse blocks can usually be delivered by Luton van (or similar) and manually unloaded.

For medium to large scale builds, If the site topography allows, it's worthwhile using a Moffet, or forklift lorry, for the delivery of blocks to ensure swift unloading at the site.

‍

Dadlwytho a thrin

Most Skylark blocks can be carried by between 1-4 people, with very little need for mechanical lifting and rarely any need for a crane. A standard WALL-M block weighs around 40kg when insulated, and standard FLOOR-M beam weighs about 100kg. 

For small garden buildings, blocks can be easily carried down the side access of existing properties, or even through the doorways of a house, without much disruption. However for medium or large buildings it is helpful to have a HIAB or forklift available to assist with the unloading of blocks during delivery. It will usually take around 3 hours to unload all blocks from the lorry and you can arrange with the delivery driver or manufacturing team to assist with this.

‍

Blocks storage

Mae'n bwysig neilltuo lle storio addas ar gyfer dadlwytho blociau WikiHouse ar y safle. Fel rheol gyffredinol bydd angen i chi ganiatáu o leiaf ôl troed cyfatebol yr adeilad gerllaw'r sylfeini. 

A dry, accessible storage area will be required for components arriving on site. Where there are no existing structures, a canopy or covering can be used to shield from weather. Parts must be kept off the ground and away from excessive moisture or direct sun for extended periods of time.